- Environment & Conservation
- Construction & Development
- Businesses & Key Accounts
- Help & FAQs
- About Us
Open cut construction repair method
There are various methods available for repairing, replacing, or rehabilitating an existing side sewer. Work with an experienced sewer contractor and get several quotes from different contractors to determine the appropriate work needed for repair.
This method of construction is the most common method of repairing side sewers, which consists of digging up the old pipe and replacing it with new pipe.
This method is beneficial for sites where there are surface improvements that an owner either chooses not to disturb or that would be expensive to replace. This method of construction consists of inserting a new flexible pipe into the old pipe. The process for inserting the pipe requires digging an installation pit and a receiving pit at each end of the side sewer to allow for the new pipe to be inserted.
CIPP consists of rehabilitating an existing pipe with a new pipe. A resin-soaked felt tube liner is inserted into the existing pipe, inflated to expand to the shape of the existing pipe, and then cured until the resin hardens to form a pipe within the old pipe. CIPP is also beneficial for sites where there are surface improvements that an owner either chooses not to disturb or that would be expensive to replace. The liner can be inserted through cleanouts in the side sewer and requires no other digging unless a cleanout needs to be installed.
If the majority of a pipe is in good condition, a spot repair may be the most suitable and cost-effective method for repair. The property owner should consider a full side sewer replacement or rehabilitation if there are multiple defects throughout the pipe.