Update on Pioneer Square Pergola Restoration
Seattle Parks and Recreation completed the installation of a temporary protection bollard for the Pioneer Square Pergola. The new bollard is anchored by a structural pipe set into the ground and provides extra strength and protection for the historical Pergola. The temporary bollard will be replaced when the fabrication and delivery of the permanent decorative bollard is completed. Parks removed the temporary cement blocks that were installed to provide short-term protection and installed a new concrete ramp from the street.
The installation of a new cornice piece on the Pergola is scheduled for the weekend of October 20-21. The required work is adjacent to the electric trolley lines on First Avenue requiring the lines to be temporarily deactivated while the work proceeds. While the work occurs on October 20 -21 the right lane of north bound First Avenue will be temporarily blocked during the installation operations to allow for a boom lift to assist in placing the restored cornice piece.
Parks anticipates the installation of the permanent decorative bollard will occur in November. This project will take about two hours and have minimal impact to the area.
In 2001 the Pergola was hit and knocked down by a semi-truck. The Pergola was completely renovated at that time, and a surface mount bollard was installed to protect the historical structure from further strikes. However, the Pergola and bollard have been hit several times since 2001, necessitating repair and reinstallation of the old bollard. Now Seattle Parks and Recreation is collaborating with the Seattle Department of Transportation to install an in-ground bollard that will provide even more protection to keep this iconic piece of Seattle’s past intact.
Constructed in 1909, the Pergola in Pioneer Square Park provided shelter for passengers waiting for the cable car that ran along Yesler Way. It was built in a Victorian style, out of iron and glass. It was restored in 1972, and designated a historic landmark in 1977.
For more information on the project, please contact Ron Wright of Ron Wright and Associates at firstname.lastname@example.org or 206-728-4248.
- 30 -